Shower Purifier includes 1 x Filtered Beauty casing (black/silver) and 1 x filter cartridge
Filtered Beauty improves your beauty routine by eliminating hidden nasties from your shower so that you have the purest start to your self-care!
Our Shower Filters have multi-stage filtration. Not only do they filter out the nasties, but they also infuse the water with beneficial minerals and Vitamin C.
Together, KDF 55, Calcium Sulfite, Activated Carbon, and High Chlorine Balls ensure MAXIMUM filtration with over 95% chlorine removal as well as reducing heavy metals, chemicals, pesticides, and other contaminants from your water
The filter is infused with beneficial vitamins and minerals such as Zeolite, Vitamin C, and tourmaline
WHAT IS HARD WATER?
Hard water is rich in chlorine, minerals and metals such as calcium, magnesium, iron, copper and lead.
Hard water reduces lather in soap and therefore, leaves behind soap scum, leaving a film on the hair and skin and can also appear on shower screens as white stains.
Our Shower Purifier reduces these contaminents such as chlorine, calcium, magnesium, lead, aluminium, odour, and heavy metals, so fewer impurities come in contact with you, your hair and your skin!?
WHAT IS IN THE FILTERED BEAUTY FILTER?
Sand Filter: Captures large sediment such as sand
Stainless Mesh: Captures medium sediment to prevent it from entering the shower purifier
Micro-Porous PP Cotton: Removes small sediment and dust from water
Calcium Sulphite: Extremely effective at reducing chlorine from all tempretured water
KDF 55: Reduces chlorine, unwanted minerals and heavy metals such as lead, chromium, copper, mercury, nickel, and copper.
Granular Activated Carbon: Helps reduce trihalomethane (THMs), and odour
Red Mineral Balls: Helps to boost oxygen levels in the water
Zeolite: Releases revitalising minerals
Vitamin C: removes chlorine and infuses the water with Vitamin C and other beneficial minerals
Tourmaline
Tourmaline: Boost filtration and releases revitalising minerals which transform your hair and skin health
WHEN DO I NEED TO CHANGE THE CARTRIDGE IN MY FILTER?
We recommend changing your Shower Purifier Cartridge every 6 months for optimal filtration. Our product has the capacity of filtered 60,000 litres of water.
A standard flow rate for a common shower is 10 litres per minute.
If your shower is being used twice a day for approx. 30 minutes that results in around 300 litres running through the filter each day.
300 litres per day for 6 months is 54,600 litres, an optimum time to replace your cartirdge.
HOW TO INSTALL
2 minute installation time! No plumber or tools required. Our ultimate Filtered Beauty™ shower fitting guide...
Tools Optional: Wrench (not necessary)
Step 1: Flush your Filtered Beauty Shower Purifier
Hold your Filtered Beauty™ Shower Purifier under a tap and turn the water on to flush out the extra carbon particles. This may turn your water black/grey in the beginning, but don’t worry, keep flushing for approx. 20 seconds, turn it over and flush in the opposite direction.
Step 2: Remove your Existing Shower Head
Remove the existing shower head from the arm, by turning it counter clockwise. This is usually done by hand; however, you may need a wrench if your shower head is on too tight. Peel away any old tape and clean the threaded pipe.
Step 3: Apply Filtered Beauty Tape
Apply the included tape tightly around your Filtered Beauty™ Shower Purifier thread and the shower arm (approximately 3-5 times).
Step 4: Time to Install Your Filtered Beauty Shower Purifier
Install your Filtered Beauty™ Shower Purifier onto the shower arm by turning it clockwise (hand tight), then install your shower head, also turning it clockwise (hand tight). If additional tightening is required, use a soft cloth to protect the Filtered Beauty™ Shower Purifier, and tighten with a wrench.
Handy hint when you're installing, remember, "righty tighty" and "lefty loosey"! Always turn clockwise unless stated otherwise.
Enjoy your purest shower yet...